Quality pressure washing in Toronto for chemical wash, aluminum siding and stucco
Refresh the look of your property with professional pressure washing in Toronto. Over time, brick and stucco’s porous surface absorbs water and traps dirt. This grime ages your property, making it look dirty and unkempt. Trust the experts at Projects Restoration Group to clean your property’s stucco, brick or aluminum exterior to make it look like new once more.

Our cleaning methods are customized for your property so that it gets the care it deserves

Chemical Wash
Our chemical wash is a non-corrosive, environmentally-friendly method for cleaning exterior stone and brick, without discolouring or damaging the surface. The solution works by using a biodegradable chemical breakdown process to easily remove dirt and pollution from the brick or stone.

Before we begin, we always ensure the surrounding hardscaping and landscaping are properly protected. Then we apply our mixture to the surface and allow it to sit for several minutes before rinsing with our 3000psi hot water unit. A second coat of the water solution is applied to ensure all dirt is removed that was missed on the first wash. Finally, a mixture of pressure washing and soda blasting together finishes the job. This mixture removes the last of the dirt, leaving a clean finishing without damaging your property’s bricks, blocks or stone.

Aluminum Siding
Making aluminum shine is our specialty! Using a 3000psi hot water power washer, we break down dirt with our detergent soap, and follow by scrubbing the entire area. We finish the job with a brightening agent to remove any pesky spots that may occur. The result is flawless aluminum.

Our methods ensure there is no blow-off or damages to your property, and we always finish with a rinse of the total area, leaving a clean, natural finish.

Stucco, a cement compound with a rough, porous surface, absorbs water and traps dirt that leads to staining and discolouration. To make your stucco look refreshed without damaging its surface, we use a mild soap that does not contain any aggressive detergents. We use the same method as cleaning brick and masonry, letting the soap sit and then rinse with our 3000psi hot water pressure washer.

To prevent your stucco from cracking or staining, we use a water-based sealant that acts as a barrier against outside elements such as acid rain, snow and pollution. Not only does this sealer protect and maintain stucco’s natural colouring but also cleans wooden decks to remove discolouration and UV damage.

Keeping your stucco exterior clean is important for overall curb appeal. Ensure your property looks its best with yearly cleaning from Projects Restoration Group.

Providing sandblasting services across Toronto
Sandblasting is a surface treatment used for many different industries. An abrasive media is accelerated through an air pressure machine. It is commonly used on joist and rafter ceilings to open the architectural design of the ceiling, as well as on bricks, wood, steel, flooring, stone and concrete. The abrasive materials commonly used include:
  • Baking soda
  • Lime
  • Glass
  • Walnut shells
  • Sand
Wet sandblasting, which is less aggressive, is done when water is added to the abrasive materials.

Before we begin, we test a small section in an inconspicuous area. The equipment is adjusted to release the correct amount of material out of the nozzle. Once it’s at the right pressure, we begin to blast the area, ensuring there are no damages to any surfaces. When the blasting is completed, we blow the area with air to remove dust and debris. Finally, we clean up the area, leaving your property spotless.

Call today to book your sandblasting consultation.

Promotions and Special Offers
Chemical Wash